Can Body Compression Tester is used to determine compression resistance strength of two-piece can body.
This instrument is reliable and easy to use. Pressure is showed by digital pressure gauge with high precision and repeatability
This tester meets the testing requirement of the following national standards:
GB/T9106-2001《Packaging containers－Aluminum easy open end and two-piece can》
GB/T17590-1998《Three-piece can with easy open end》
Can Lid Compression Tester
Can Lid Compression Tester is used to determine compression resistance strength of two-piece easy open can lid and sealing property
This tester meets the testing requirement of the following national standards:
GB/T9106-2001《Packaging containers－Aluminum easy open end and two-piece can》
GB/T17590-1998《Three-piece can with easy open end》
Steel Pails Compression Tester
This instrument is used to test the sealing property of Grade 1~2 steel pails and meets the requirement of standard GB/T13252-1991Packing containers－Steel pails
Aerosol Cans Compression Tester
This tester is applied to compression test of aerosol cans and leaking test of aerosol valves.
This tester meets the requirement of the following standards:
13042-1998《Packaging containers--Aerosol cans》
GB17447-1998《Aerosol valve》
Combining strength and toughness tester for coatings
This instrument is utilized to test inner coatings intactness of metal containers
Range:0~80mA
Resolution:0.1mA
Accuracy:1%
Lifting handle fatigue tester for mesh bag
This tester is suitable for lifting test for shopping bag
This tester meets the requirement of the following standards:
GB/T18893-2002 Shopping Bag
Working voltage:~220V 50HZ
Vibration frequency:2~3Hz/s
Payload:≤30kg
Amplitude:30mm±2mm
Successive working time 0 ～9999s
Can seam tester
This instrument is used to test sealing structure and to evaluate seam quality of the metal cans. It is easy to operate and has high accuracy. The program of the tester includes accessories testing, automatic verification for conforming, testing forms output, data repository, data research, data printing and accuracy self—calibration etc. The operation is simple, easy to grasp and free from specific training. With the help system, you can self-study to master in 10 minutes.
Synthetical tester for metal cans
This instrument can test the full open force of the metal can as well as the whole opening process and measure the coatings intact.
Electric heated high-pressure kettle
This device is used to test the laminated pouch for food.
Pressure range 0~1Mpa
The instrument meets the testing requirement of the following national standard:
GB/T10004-98 Laminated retort film and pouch
Hook release tester
Power voltage:380V/220V 50Hz
Specified Payload:≤500kg/≤1000kg
The instrument meets the testing requirement of the following national standard:
GB/T4857.5-92 Transport packages－Vertical impact test method by dropping
Digital torque tester
The torque tester consists of special clamps attached a precise sensor and digital monitor. It has different connection accessories for clamps with which the different sizes and torque of bottle caps can be measured. This instrument possesses the merit of easy operation and high accuracy.
Gas transmission tester for high barrier film
This instrument is utilized to determine the gas transmission of the film and sheet according to the testing theory regulated in GB/T1038-2000 Plastics--Film and sheeting--Determination of gas transmission--Differential-pressure method
Specification:
Range: 1000 ～100000cm3/m2?d?0.1Mpa
Accuracy: 1cm3/m2?d?0.1Mpa
Working temperature: 5℃～40℃
